G2258-87310 |
Waste tube, 0.8 mm id, 15 cm long |
416.97 |
G2258-87312 |
Front seat tube PTFE 0.25mm id 10cm long |
561.61 |
G2258-87313 |
Back seat tube PTFE 0.25mm id 12 cm long |
561.61 |
G2258-87314 |
Tubing assy, solvent flush for G2258A |
631.67 |
G2258-87315 |
Back Seat Tube, SST 0.5 mm id 12 cm long |
544.66 |
G2258-87316 |
Front seat tube SST 0.5 mm id 10 cm long |
544.66 |
G2260-68711 |
5ml Multi draw loop for use with G2260A |
4469.15 |
G2260-87101 |
Needle seat for G2260A autosampler |
1572.96 |
G2260-87201 |
Needle assy for G2260-87101 needle seat |
2014.79 |
G2260-87300 |
Capillary sampler to column, SST |
911.91 |
G2260-87301 |
Capillary pump to sampler,SST40cm,0.50mm |
875.75 |
G2350-61090 |
Discharge Tube Kit for G2350 |
637.32 |
G2397-20540 |
MICRO ECD MIXING LINER |
562.74 |
G2397-80520 |
Micro ECD Mug Adapter |
7665.92 |
G2421-60001 |
ESI Tuning Mix |
2549.28 |
G2425A |
APCI Negative Ion Performance Standard |
2144.74 |
G2427A |
API-ES Nebulizer needle (ea) |
2264.5 |
G2428A |
APCI Nebulizer Needle (ea) |
2221.6 |
G2431A |
ESI Tuning Mix for Ion Trap |
2414.81 |
G2440-60200 |
Ceramic Channel Electron Multiplier AY |
30916.8 |
G2441-80010 |
Electron Multiplier Ceramic Channel |
28344.92 |
G2571-67001 |
Canted Coil Spring 8.9mm-OD |
117.52 |
G2571-80103 |
Electron multiplier horn, high gain |
21937.82 |
G2581-80875 |
TS800 Tip Seal Replacement Kit |
6351.73 |
G2589-20043 |
5973 Inert/Ultra Ion Source Body |
9471.66 |
G2589-20044 |
Repeller, 5975 |
1875.8 |
G2589-20045 |
Drawout Plate, 6mm, inert, 5975/5973 |
1810.26 |
G2589-20100 |
Drawout Plate, 3mm, for inert source |
1665.62 |
G2589-20101 |
Inert Source Washer |
1093.84 |
G2617-60507 |
PTV Septumless head, 6890 |
41585.13 |
G2617-80550 |
PTV COL ADAPTER TUBE |
1294.98 |
G2630-60710 |
Oven exhaust deflector for 6850 |
2478.09 |
G2855-20530 |
Internal Nut,CFT Capillary fitting |
329.96 |
G2855-20532 |
Internal nut, CFT 1/16inch SS fitting |
364.99 |
G2855-20590 |
Column storage fitting |
496.07 |
G2855-60200 |
Ferrule Pre-Swage Tool,Capillary Flow |
1995.58 |
G2855-60570 |
Plug for microfluidic manifold or unions |
673.48 |
G2860A |
Standard 5973/75 Extended Linearity Appl |
37729.57 |
G3138-65117 |
Rotor Seal for Valve,ISIS |
2968.51 |
G3138-65118 |
Nut for valve, ISIS, 6/pk |
1141.3 |
G3138-65119 |
Ferrule for valve, ISIS, 6/pk |
1348.09 |
G3138-65121 |
Mixer for ISIS |
2793.36 |
G3138-65122 |
Sample loop, 100 uL, ISIS |
1357.13 |
G3138-65125 |
Plastic Tray ISIS |
859.93 |
G3158-90021 |
GC Interface Manual |
1070.11 |
G3160-60015 |
Holder for carry tray cover, I-AS |
15916.05 |
G3160-65306 |
PFA needle 0.3 mm id, std probe for I-AS |
7010.52 |
G3160-65307 |
External rinse bottle 100mL, w/caps, 6/p |
1104.01 |
G3160-65320 |
Rinse solution inlet/outlet tubing, I-AS |
1299.5 |
G3160-65321 |
Tray Cover,I-AS |
2093.89 |
G3160-65324 |
PFA Needle, 0,8 mm ID |
6855.71 |
G3160-65325 |
Tubing holder, PEEK, micro flow neb. |
1570.7 |
G3160-65328 |
Drain tube to rinse + drain bottles I-AS |
283.63 |
G3160-67000 |
Drain tube Tygon, 3/32 x 5/32, 5m |
409.06 |
G3160-80041 |
Needle holder for I-AS |
1099.49 |
G3160-80043 |
Washing bottle,I-AS |
1431.71 |
G3160-80060 |
I-AS tray A, 89 positions for 6 mL vials |
9723.65 |
G3160-80061 |
I-AS Tray B, 53 positions for 18mL vials |
9723.65 |
G3160-80062 |
I-AS Tray C, 18 positions for 50mL vials |
8578.96 |
G3160-80063 |
I-AS tray D, 79x2mL + 10x18mL positions |
9723.65 |
G3160-80064 |
I-AS tray E, 79x6mL + 10x18mL positions |
9723.65 |
G3160-80065 |
I-AS Tray F, 15 places for 48mm od vials |
9723.65 |
G3160-80066 |
I-AS Tray G, 28 positions for 20mL vials |
9723.65 |
G3160-80200 |
Serial-USB Converter cable for I-AS |
2030.61 |
G3160-90021 |
Integrated Autosampler (I-AS) Manual |
1030.56 |
G3160-96021 |
Integrated Autosampler (I-AS) Manl (JP) |
1030.56 |
G3280-60555 |
Drain tubing assembly for ICP-MS |
2091.63 |
G3280-60580 |
Organic solvent introduction kit, ICP-MS |
32689.77 |
G3280-60590 |
On-line Int Standard addition kit ICP-MS |
10131.58 |
G3280-60609 |
Omega lens for x-lens, ICP-MS, 1/pk |
4983.3 |
G3280-60612 |
Extraction lens 1 for x-lens for ICP-MS |
3767.42 |
G3280-60613 |
Extraction lens 2 for x-lens for ICP-MS |
3767.42 |
G3280-60615 |
Plate bias for ICP-MS |
2579.79 |
G3280-60671 |
Offset skimmer tool, ICP-MS, 1/pk |
16077.64 |
G3280-60910 |
Maintenance Video/DVD for ICP-MS |
640.71 |
G3280-67003 |
Basic Supplies 77/79/8800, Inland 45 oil |
15948.82 |
G3280-67004 |
Comprehensive Supplies 7700x+e/8800 |
124756.52 |
G3280-67007 |
Comprehensive Supplies 7700s/8800semicon |
146857.06 |
G3280-67022 |
Carrier/Make-up/Dilution gas tubing |
1127.74 |
G3280-67023 |
Plasma/Aux gas tubing with inner sleeve |
586.47 |
G3280-67035 |
Extraction-Omega lens assy for s-lens |
16762.42 |
G3280-67037 |
Screw and spacer kit for x-lens, ICP-MS |
6985.66 |
G3280-67038 |
Screw and spacer kit for s-lens, ICP-MS |
7074.93 |
G3280-67039 |
Extraction-Offset lens assy for x-lens |
14938.6 |
G3280-67044 |
Screw/Spacer/O-ring for cell, ICP-MS |
5715.54 |
G3280-67045 |
Octopole assembly, ICP-MS, 1/pk |
11802.85 |
G3280-67046 |
Manual vent valve for ICP-MS, 1/pk |
2147 |
G3280-67062 |
T-Joint with Earth block for ICP-MS, 1/p |
6922.38 |
G3280-67110 |
Spacer (deflect/plate b.), 4/pk |
466.69 |
G3432-60220 |
TCD Base Assembly - Tested |
33261.55 |
G3433-63100 |
Micro ECD Mug Adapter Weldment |
7427.49 |
G3434-60806 |
NPD Blos bead |
10555.33 |
G3435-60330 |
FPD+ Exit Tube Assembly |
3484.92 |
G3435-60350 |
Packed-Capillary Adapter Assembly |
4164.05 |
G3436-67000 |
FPD+ Dual PM Kit |
7017.3 |
G3440-20022 |
Inert Draw Out 9.0mm, Inconel |
4922.28 |
G3440-60234 |
UM+ Tube 1/16 in 0.020 in x 1000mm CPM |
2389.95 |
G3452-60570 |
Cap Inlet Shell Weldment,7890, Inert |
9492 |
G3452-60586 |
Capillary Insert Weldment, Inert, 7890 |
10718.05 |
G3452-60730 |
Split/Splitless Inlet Insert w/Vent Full |
5073.7 |