| 9910111900 |
SPS 3 probe 0.8mm id inert, PTFE sleeved |
3026.14 |
| 9910112000 |
SPS 3 probe 1.0mm id inert, PTFE sleeved |
3026.14 |
| G1131A |
Mandatory option for a 7900 with s-lens |
102365.57 |
| G1131A |
Add Ni sampling cone for 7900, 1/pk |
102365.57 |
| G1131A |
Add Ni plated sampling cone for 7900,1/p |
102365.57 |
| G1131A |
Add Pt sampling cone for 7900, 1/pk |
102365.57 |
| G1131A |
Add Pt sampling cone (18mm insert), 1/pk |
102365.57 |
| G1131A |
Add Ni skimmer cone for 7900/x-lens,1/pk |
102365.57 |
| G1131A |
Add Pt skimmer cone with Cu base, 1/pk |
102365.57 |
| G1131A |
Add Pt skimmer cone with Ni base, 1/pk |
102365.57 |
| G1131A |
Add Pt skimmer cone for 7900/s-lens,1/pk |
102365.57 |
| G1131A |
Add Ni skimmer cone for s-lens, 1/pk |
102365.57 |
| G1131A |
Add AVF60SHCE oil for Agilent MS40+ pump |
102365.57 |
| G1176-60541 |
Split vent trap for the 6820 |
1058.81 |
| G1290-60600 |
I.D. Cable 7694/3396 |
1785.4 |
| G1310-68731 |
PM Kit for seal wash option |
1496.12 |
| G1310-68741 |
PM kit for 1260 Iso/Quat/1220 pump |
1988.8 |
| G1310-68742 |
Seal wash PM kit for 1260 Pump |
682.52 |
| G1311-60002 |
Plunger Housing |
2519.9 |
| G1311-60003 |
Bottle Head Assembly |
1161.64 |
| G1311-60006 |
In-line filter for G1311A |
3540.29 |
| G1311-67304 |
LC Pump PTFE connecting tube |
838.46 |
| G1311-68710 |
Pump Start-up Kit |
6554 |
| G1311-68711 |
Active seal wash kit for iso/quat pumps |
13312.53 |
| G1311-81600 |
Capillary, damper to inlet chamber 2 |
462.17 |
| G1311-81601 |
Capillary, outlet valve to damper |
524.32 |
| G1312-60020 |
Cartridge for active inlet valve 600bar |
4744.87 |
| G1312-60025 |
Active inlet valve,without cartridge |
4449.94 |
| G1312-60066 |
Passive Inlet Valve 1220/1260 |
3623.91 |
| G1312-60067 |
Outlet Ball Valve for 1100/1200/1260 |
5011.55 |
| G1312-60068 |
1260 Solvent Selection Valve |
6728.02 |
| G1312-60071 |
Purge Valve Long With PTFE Frit |
4622.83 |
| G1312-60166 |
1260 Infinity inlet valve type N |
5166.36 |
| G1312-67300 |
Capillary Outlet ball valve to piston 2 |
868.97 |
| G1312-67301 |
Capillary, damper to purge valve |
820.38 |
| G1312-67302 |
Mix.SST-Capillary Assembly, binary pump |
2650.98 |
| G1312-67305 |
SST connecting capillary,60cm, 0.17mm |
875.75 |
| G1312-67500 |
Calibration Capillary Assy |
4679.33 |
| G1312-68716 |
Bottle head assembly for F29/32 tapered |
1262.21 |
| G1312-68730 |
PM Kit for binary pump |
3909.8 |
| G1312-68741 |
PM kit for G1312 binary pump |
2619.34 |
| G1312-87300 |
Absorber-Capillary 500uL volume |
989.88 |
| G1312-87301 |
SST Restriction capillary, 0.17mm id |
1443.01 |
| G1312-87303 |
SST Capillary 400x0.17 mm, m/m, ps/ps |
809.08 |
| G1312-87304 |
SST Capillary 700x0.17mm, m/m, ps/ps |
838.46 |
| G1312-87305 |
SST Capillary 150x0.17mm, m/m, ps/ps |
809.08 |
| G1312-87306 |
SST Capillary 105x0.17mm, m/m, ps/ps |
809.08 |
| G1312-87330 |
Solvent mixer, 1100/1200 Series |
2914.27 |
| G1313-27302 |
Disposal Tube for ext. vial tray |
656.53 |
| G1313-43204 |
Seat adapter |
63.28 |
| G1313-43216 |
Waste Adapter, 1100/1200 Autosamplers |
149.16 |
| G1313-87303 |
Loop extension capillary,SST 900 ul |
2282.6 |
| G1313-87304 |
Capillary, 18cm, .12mm id 1/16 male/male |
893.83 |
| G1313-87305 |
Capillary, 0.17x180mm 1/16 in male/male |
911.91 |
| G1313-87307 |
Seat capillary, 0.5ml, 0.5mm id |
911.91 |
| G1313-87308 |
Seat capillary, 1.5ml, 0.9mm id |
1181.98 |
| G1314-60023 |
Cell Assembly VWD-PREP-0.06mm |
33261.55 |
| G1314-60024 |
Cell Assembly VWD-PREP-3mm-4ul |
30843.35 |
| G1314-60025 |
Cell Assembly VWD-PREP-0.3mm |
30843.35 |
| G1314-60081 |
Micro Cell Assy |
23526.6 |
| G1314-60182 |
Hi Pressure flow cell VWD,10mm,14ul,RFID |
36702.4 |
| G1314-60183 |
Semi-micro flow cell VWD,6mm,5ul,RFID |
16717.22 |
| G1314-60186 |
Standard flow cell VWD,10mm 14ul,RFID |
15852.77 |
| G1314-60187 |
Micro Flow cell VWD,3mm,2ul,RFID |
22283.6 |
| G1314-65050 |
CELL KIT STD |
2914.27 |
| G1314-65051 |
Gasket No.2 std service |
1640.76 |
| G1314-65052 |
CELL KIT MICRO |
2967.38 |
| G1314-65054 |
Cell Kit High Pressure |
5559.6 |
| G1314-65056 |
Cell Kit Semi-Micro |
2914.27 |
| G1314-65061 |
CELL KIT STD |
2055.47 |
| G1314-65062 |
CELL SCREW KIT |
187.58 |
| 7910033500 |
Test tube holder, Cary 50/60, 1/pk |
11251.41 |
| 7910052800 |
Glass transfer tube, 208 L incl. clip |
1458.8 |
| 7910052900 |
Torch one piece ball joint rad 1.4mm inj |
6913.34 |
| 79826-87601 |
CAP, Conn 1 |
1349.22 |
| 79826-87605 |
CAP, CONN .5 |
1349.22 |
| 79826-87606 |
Capillary, 80 x 0.17mm |
1349.22 |
| 79826-87607 |
Capillary, 280 x .17mm |
1349.22 |
| 79826-87608 |
Connection, capillary, 400mm, 0.17mm id |
1349.22 |
| 79835-04123 |
Diaphragm |
781.96 |
| 79835-65213 |
Replacement sieve for check valve crtrdg |
1038.47 |
| 79835-67101 |
Check valve cartridge |
3239.71 |
| 79835-87330 |
Solvent mixer |
3056.65 |
| 79835-87638 |
Column, connector |
1640.76 |
| 79841-65501 |
Lubricant |
383.07 |
| 79841-87609 |
Capillary tubing, 35mm, 0.12mm id. |
1039.6 |
| 79841-87610 |
Capillary 60 mm |
1039.6 |
| 79846-27101 |
Seal, threaded end of syringe |
193.23 |
| 79846-87201 |
Needle insert, 25 ul |
893.83 |
| 79846-87202 |
Needle insert, 250ul |
1389.9 |
| 79846-87604 |
25ul Loop Capillary |
1476.91 |
| 79846-87605 |
Seat capillary, 0.12 mm id, 110 mm |
1039.6 |
| 79847-60005 |
Magazine rack for automatic sampler |
228.26 |
| 810167000 |
Standards rack SPS 3, 6 x 29mm od tubes |
1181.98 |
| 810177600 |
Tube holder for SPS 3 autosampler, 1/pk. |
59.89 |
| 810187500 |
Mounting bkt, Twister s/c radial ICP 1/p |
5155.06 |
| 810187600 |
Mounting bkt, Twister s/c axial ICP 1/p |
5155.06 |
| 815-0129 |
Tubing polyurethane 1/8 x 1/4 in, per ft |
42.9 |
| 815-0485 |
Tubing PTFE (.125od x 0.065id)in. per ft |
73.5 |
| 816-0018 |
Kit microdissecting UMAS |
2895.1 |
