| HC05-0030 |
Tedlar Bag,30L,2 valves |
534 |
| HC05-0050 |
Tedlar Bag,50L,3 valves |
756 |
| HC05-0100 |
Tedlar Bag,100L,3 valves |
1045 |
| HC05-0200 |
Tedlar Bag,200L,3 valves |
1500 |
| HC05-0300 |
Tedlar Bag,300L,3 valves |
1800 |
| HC05-0500 |
Tedlar Bag,500L,3 valves |
2600 |
| HC05-1000 |
Tedlar Bag,1000L,4 valves |
3556 |
| HC05-2000 |
Tedlar Bag,2000L,4 valves |
5734 |
| HMP-04KIT |
Micro-puncher 04 Kit Micro-puncher 04 Kit, includes each 3 pcs of Micro-puncher 3.0 / 4.0 / 5.0 mm and 2 sheets of cutting mats 65 |
3905 |
| HMP-3.00D |
Harris Micropuncher 300 Harris Micropuncher 3mm, 10ea |
2469 |
| HMP-3.00S |
Micro-puncher 300S Micro-puncher 3.0mm,3 ea, cutting mat 1pc |
1562 |
| HMP-4.00D |
Harris Micropuncher 400 Harris Micropuncher 4mm, 10ea |
2469 |
| M6585 |
F3.7mm镜头（必须同时配置8个） |
796 |
| MJ1-1111 |
MicroJet Tube MicroJet Tube, quartz, 1 ea |
1876 |
| MJ1-1121 |
LN2 Saver a set of two pieces. |
1045 |
| MJ1-1201 |
Support Plate (for Agilent 6890) Support Plate of Liquid Nitrogen Feed Tube for Agilent6890/7890, including sems screw (M4 x 8) 4e |
1876 |
| MJ1-1202 |
Support Plate (for HP 5890) Support Plate of Liquid Nitrogen Feed Tube for HP 5890, including sems screw (M4 x 8) 4ea, 1set |
1745 |
| MJ1-1204 |
Support Plate (for Shimadzu GC-17A/2010) Support Plate of Liquid Nitrogen Feed Tube for Shimadzu GC-2010, including sems screw (M4 |
2244 |
| MJ1-1207 |
Support Plate (for TRACE GC) Support Plate of Liquid Nitrogen Feed Tube for Trace GC, including sems screw (M4 x 8) 4ea, 1set |
2244 |
| MJ1-1208 |
Support Plate (for Varian CP3800) Support Plate of Liquid Nitrogen Feed Tube for Varian CP3800GC, including sems screw (M4 x 8) 4e |
2244 |
| MJ1-1209 |
Support Plate for PerkinElmer Clarus GC Support plate of liquid nitrogen feed tube for PerkinElmer Clarus GC, includes each 4 pcs |
2952 |
| MJ1-1211 |
Support Plate for Agilent 7890GC SP-1 Inlet Support plate of liquid nitrogen feed tube for Agilent7890 SP-1 inlet, includes each 4 |
2468 |
| MJ1-1231 |
guide post guide post, 2 ea |
1128 |
| MJ1-1251 |
guide post guide post, 1 ea |
570 |
| MJ1-1303 |
Liquid Nitrogen Feed Tube Ex Liquid Nitrogen Feed Tube, 1ea, Exchange assembly is available (MJ1-1353) |
27918 |
| MJ1-1304 |
Thermal Exchange Coil 10L Thermal Exchange Coil for 10L container, 1ea |
1627 |
| MJ1-1305 |
Thermal Exchange Coil 2L Thermal Exchange Coil for 2L container, 1ea |
1627 |
| MJ1-1306 |
Thermal Exchange Coil 25L Thermal Exchange Coil for 25L container (SPI 10418-A) |
1627 |
| MJ1-1352 |
Liquid nitorgen feed tube aasy. Liquid nitorgen feed tube aasy., Exchange assy, 1 assy. |
17449 |
| MJ1-1353 |
Liquid Nitrogen feed tube Exchange assy. Liquid nitrogen feed tube assy., Exchange assy, 1 assy. Rebuilt of MJ1-1303 |
17449 |
| MJ1-1500 |
Liquid Nitrogen Container Kit Bench top Liquid Nitrogen Container Kit, 1set, including each one ofContainer Cap 2L, Thermal Exchan |
11597 |
| MJ1-1511 |
Liquid N2 Container 2L Liquid N2 Container 2L, 1ea |
4986 |
| MJ1-1512 |
Container Cap 2L Container Cap 2L, cap for Liqui N2 Container 2L, 1ea |
1745 |
| MJ1-1513 |
Stand Base Stand Base, 1ea |
1627 |
| MJ1-1514 |
Stand Pole Stand Pole, KD Pole with a washer and a screw, 1set |
950 |
| MJ1-1515 |
Clamp Clamp for holding liquid nitrogen feed tube, 1 ea |
903 |
| MJ1-1517 |
Indicator Liquid nitrogen fluid level indicator for 2litter container, 1ea |
131 |
| MJ1-1522 |
Container cap for 25 litters container Container cap for 25 litters container (SPI 10418-A) |
1745 |
| MJ1-1600 |
Thermal exchange coil set for 25 litters container Thermal exchange coil set for 25 litters container, include a thermal exchange |
3241 |
| MS604251 |
MS joint N MS joint N, 1 ea, use with MS604254 |
2624 |
| PAL-SyrGC10ul |
Kit GC Syringe 10ul for COMBI PAL and GC1 PAL |
9587 |
| PPM-96 |
Biotage® PRESSURE+ 96 Positive Pressure Manifold, 1/p |
85052 |
| PY1-1024 |
Sampler release button For Double-Shot and Single-Shot sampler |
570 |
| PY1-1030 |
Liquid Injection Sampler Liquid sampler for all pyrolzyer, 1 set |
5366 |
| PY1-1031 |
Sampler Nut For Double-Shot sampler and Single-Shot sampler, 1ea |
2187 |
| PY1-1040 |
Single-Shot Sampler for all single shot pyrolyzer, 1 set |
18935 |
| PY1-1110 |
Sampler Base 2020 Sampler base for PY-2020D/iD/S/iS, 1 set |
9185 |
| PY1-1174-F |
Needle set deactivated tube 3pcs |
1496 |
| PY1-1175 |
Needle Set 315 interface needle, 5 ea/set, 31.5mm |
2612 |
| PY1-1176 |
Needle Set 660 interface needle, 3 ea/set, 66 mm |
1496 |
| PY1-1177 |
Needle Set1/16A Interface needle, 0.8x1/16", no ferrule, 3 ea |
1968 |
| PY1-1211 |
Finger-tighten nut Finger-tighten nut, fixing quartz pyrolysis tube, 1 ea |
808 |
| PY1-1213 |
Metal Washer 2 Metal washer 2, use with o-ring to fixihg quartz pyrolysis tube, 3 ea |
535 |
| PY1-1214 |
Lock screw Lock screw for the Double-Shot sampler, 1ea |
428 |
| PY1-2216-F |
Absorption Trap Tube Absorption trap tube, 3 ea |
784 |
| PY1-2218 |
Absorption trap set 6890SV Absorption trap set 6890SV, for Agilent 6890 split vent, 1 set |
1247 |
| PY1-2227 |
Absorption Trap Set 17SV Absorption trap set 17SV, for Shimadzu GC-17A, 1 set |
1876 |
| PY1-2228 |
Absorption trap set for TRACE GC Absorption trap set for TRACE GC, with 2mm ferrules and nuts |
1247 |
| PY1-2501 |
Swagelok union 1/16" Swagelok union 1/16", brass, for PY1-2210, 1set |
440 |
| PY1-2502 |
grapyte ferrule grapyte ferrule, for PY1-2210, 10 ea |
1247 |
| PY1-2504 |
Fulsed silica tube Fulsed silica tube, for PY1-2210, 1 ea |
1247 |
| PY1-2505 |
Graphite vespel ferrule Graphite vespel ferrule, 0.4mm、10 ea |
1247 |
| PY1-3018A |
Quartz Pyrolysis Tube A30 for PY-3030 series |
2152 |
| PY1-3321 |
SUS Pyrolysis Tube 3030 For EGA/PY-3030D and PY-3030S, stainless steel, 1 ea |
2343 |
| PY1-3337 |
Glass Insert Deactivated glass insert. 1 ea |
689 |
| PY1-3361 |
Quartz Insert (1ea) quartz insert (Ultra inert treated), 1ea |
2493 |
| PY1-3512 |
Needle Nut Needle nut for interface needle, 3 ea |
250 |
| PY1-3513 |
Interface union N Interface union for PY-3030D, 1 ea |
2256 |
| PY1-3514 |
Interface Union N16 Interface union for 1/16" needle, 1 ea, with ferrule and nut |
2968 |
| PY1-3515 |
ITF Union N set ITF union N, 1ea, ITF needle 2 ea |
3801 |
| PY1-3533 |
ITF Union ASN Interface Union Assembly for use with AS-1020E, deactivated, compatible with EGA/PY-3030D and PY-2020iD/iS, 1ea |
3324 |
| PY1-3544 |
Septum nut set 3030S For Shimadzu GC2010/17A, A set of a septum nut and a needle guide, 1 set |
2152 |
| PY1-3551 |
Heat sink adapter kit 3030SA for Agilent GC7890/6890 and Shimadzu 2010/17、1 ea, 1.5 mm key wrench 1 ea |
2295 |
| PY1-3552 |
Heat sink adapter kit 3030PE for PE Auto system/Clarus GC、1 ea, 1.5 mm key wrench 1 ea |
1900 |
| PY1-3553 |
Septum nut set 3030A For Agilent GC7890/6890, A set of a septum nut and a needle guide, 1 set |
1781 |
| PY1-3555 |
Heat sink adapter kit 3030T for Thermo Fisher Trace GC、1 ea, 1.5 mm key wrench 1 ea |
1781 |
| PY1-3556 |
Septum nut set 3030P for PE Auto system/Clarus GC、septum nut 1 ea, needle guide 1 ea |
1781 |
| PY1-3563 |
Interface cover for 3030D Interface cover for 3030D, contains set screw, 1 set |
1057 |
| PY1-3570 |
Heat Sink Adapter Set with 1.5mm hexagon wrench, 2screws, 1 set |
1876 |
| PY1-3571 |
Heat Sink Adapter 1 ea, with 2 screws |
1805 |
| PY1-3572 |
Key wrench Key wrench, 1.5mm, 1 ea |
60 |
| PY1-3573 |
Chuck base fixutre Chuck base fixutre |
380 |
| PY1-3574 |
Double Head Wrench15/16 For Agilent / Shimadzu septum cap 15/16mm |
437 |
| PY1-3576 |
Heat Sink Adapter L" For Perkin Elmer Clarus GC |
1805 |
| PY1-3581 |
Septum Nut 17 |
760 |
| PY1-3590 |
IF base Interface block |
3989 |
| PY1-3631 |
Storage Stand 30A Pyrolyzer storage stand |
1250 |
| PY1-3711 |
Eco-cup Stand 10 Eco cup holder for 10 cups, 1ea |
748 |
| PY1-3721 |
Carrier gas tube 2010pyrolyzer with GC-2010 Used between pyrolyzer and GC-2010, GN-2/open end, 2mm od. Stainless tube 300mm, Part |
701 |
| PY1-3722 |
Carrier gas tube for pyrolyzer with GC-17 Used between pyrolyzer and GC-17, GM-2/open end, 2mm od. Stainless tube 301mm, Part of P |
701 |
| PY1-3723 |
Carrier Gas Tube T 1m Stainless steel pipe (2mm od, 0.8mm id), 2 ea |
922 |
| PY1-3751 |
USB Cable Fixing Bracket For EGA/PY-3030D and PY-3030S |
156 |
| PY1-3851 |
Mounting stand 2010 Pyrolyzer mounting bracket for Shimadzu GC-2010 |
1128 |
| PY1-3852 |
Mounting stand 2014 Pyrolyzer mounting bracket for Shimadzu GC-2014 |
1128 |
| PY1-3853 |
PY Mounting Stand 17 Pyrolyzer mounting bracket for Shimadzu GC-17A |
1484 |
| PY1-4908 |
Performance evaluation standard sample Polystyrene 2.5mg film, Me-stearate 5w% , 2ml glass bottle. |
499 |
| PY1-4910 |
Polystyrene Polystyrene, 150mg (pellet 10ea), standard sample |
380 |
| PY1-4920 |
Sampler lubricant Sampler lubricant, 150mg, 5 bottles |
1496 |
| PY1-4930 |
Septum releasing agent Perfluoropolytrimethyleneoxide |
238 |
| PY1-5111 |
Fine quartz wool Fine quartz wool 2g |
380 |
