| 6799968100 |
LIGHT PIPE MAT /FT |
67.2 |
| 6799968600 |
Light Pipe / Cable, Dual |
13220.4 |
| 680-0062 |
CONNECTOR BULKHEAD |
344.3 |
| 6810004500 |
FILTER AUTO DRAIN NORGEN |
5189.2 |
| 6810005300 |
FLTR SINTERED METAL GRDE 5 |
57.9 |
| 6810005400 |
FLTR SINTERED METAL GRADE 2 |
220.5 |
| 6810005700 |
CARTRIDGE DE-IONISATION |
7453.2 |
| 6810006700 |
FILTER LIQUID 34 BODY |
1880.6 |
| 6810006900 |
FILTER ASSY FAN CETAC 110009 SP 5580 |
1983.7 |
| 6810007100 |
Filter, exter, 2 mm cetac SP 5710, 1/pk |
8439.8 |
| 6810007300 |
FILTER DRIERITE COLUMN 18 NPT FEMALE |
3965.1 |
| 6810008000 |
Compressed Air Filter Assembly 22 CFM |
5370 |
| 6810009390 |
Solvent Filter |
201 |
| 6810009700 |
Filter, 10 MM HIS |
711.9 |
| 6910000300 |
O RING 516 IDX 716 ODX116IN NIT |
57.9 |
| 6910001900 |
O RING 38 IDX 12 ODX116IN NIT |
57.9 |
| 6910004500 |
O RING 12 IDX 1116 ODX332IN NIT |
77.7 |
| 6910015600 |
GASKET FOAM SEAL |
146.6 |
| 6910015900 |
O RING 916 IDX 1116 ODX116IN NIT |
57.9 |
| 6910041100 |
Pad lubrication felt |
55.3 |
| 70000 |
Pulsed discharge module |
23615.6 |
| 7114990200 |
SWITCH, DPST |
670.3 |
| 7114991000 |
SWITCH TOGGLE SPDT |
400.7 |
| 7114992800 |
SWITCH TOGGLE |
645.8 |
| 7114996100 |
TOGGLE SWITCH DPDT |
221 |
| 7120010000 |
SWITCH,TOGGLE |
296.8 |
| 7120-6005 |
WIRE MARKER SGL-LTR C ADH-BK-LBL CLOTH |
74.4 |
| 7121-4638 |
Label-Antistatic 1.812-in-WD 2.5-in-LG |
74.4 |
| 7121970200 |
SWITCH, ROCKER |
579.7 |
| 7121981100 |
SWITCH, TOGGLE 15A |
256.7 |
| 7122920200 |
SWITCH,GRN PB DPDT |
4476.9 |
| 7122920600 |
SWITCH, PUSH BUTTON |
549.8 |
| 7122935400 |
SW,PB,E-STOP,40MM,RED |
473.7 |
| 718-0105 |
SWITCHING POWER SUPPLY |
5270.5 |
| 718-0106 |
POWER SUPPLY, LINEAR15V |
5713.7 |
| 718-0119 |
FIR PWR SUPPLY EM150 (-95130) |
85910.9 |
| 7190012700 |
SW,KEY SELECTOR,2-N.O.,MAINT |
2782.6 |
| 719-0072 |
RELAY 30A PANEL MOUNT SPDT12V |
1668.4 |
| 7199697800 |
SWITCH, SINGLE THROW |
261.2 |
| 7199730300 |
SW, FLOW, LOW, ADJ, BRASS |
4651.2 |
| 7199858500 |
SWITCH THUMBWHEEL |
644.4 |
| 7199866900 |
SWITCH |
314.9 |
| 7199973800 |
SWITCH, CONTACT BLOCK |
598.6 |
| 7199992770 |
SW,GUARD,E-STOP SHROUD,ROHS |
1306.7 |
| 7200008100 |
ECD WRENCH |
817.3 |
| 720-0206 |
SWITCH, INTERLOCK SAFETY KEY |
1209 |
| 720-0231 |
SWITCH, INTERRUPTER |
1611.9 |
| 72-1001 |
Bio-Dis III Service Manual |
1083.6 |
| 7210015300 |
SPANNER IGNITION 5.5 AF |
830.1 |
| 7210015400 |
WRENCH SKT HEX 1.5 MM AF (SHORT SERIES) |
22.4 |
| 7210015600 |
Allen key hex 2.5mm short right angle |
44.6 |
| 7210019400 |
ASSY BACK LIGHTING JIG |
50360.4 |
| 7210019600 |
Drvr ball, 5mm c/w hndl, hex wrnch, 1/p |
1073.9 |
| 7210020400 |
DRIVER BALL 2 5 MM CW HANDLE NO 10 |
324.2 |
| 7210020500 |
DETECTOR MIRROR ALIGN TOOL |
1418.6 |
| 7210021100 |
TOOL PRE OPTICS TORCH ALIGNMENT |
7894.1 |
| 7210021700 |
TARGET VASRA OPTICS ALIGNMENT |
629.1 |
| 7210021800 |
TOOL SPS ARM ALIGNMENT |
4707.9 |
| 7210021900 |
OPTICS ALIGNMENT TOOLS CARY 45 |
48375.7 |
| 721-0022 |
THERMISTOR, 10K OHMS 1pct |
366.2 |
| 7210022000 |
PM mirror alignment jig - Cary 45 |
7674.8 |
| 7210022100 |
ALIGN JIG GRATING PIVOT AandB - CARY 45 |
12282.2 |
| 7210022400 |
SCOMP BEAM ALIGNMENT JIG - CARY 45 |
22684.3 |
| 7210022500 |
OPTICS ALIGN JIG CARY 45(REFER 728630) |
23740.6 |
| 7210022800 |
MONO ALIGNMENT POWER SUPPLY - CARY 45 |
8840.4 |
| 7210022900 |
NUT SPINNER 732 AF |
1078.3 |
| 7210023000 |
Spanner electrode tool |
239.1 |
| 7210023400 |
JIG CORNER MIRROR ALIGN |
15427.6 |
| 7210024600 |
SPANNER OPEN END 10 AND 16 AF 316 S.S. |
1741.7 |
| 7210025100 |
Tool PMT Align Target AA |
4968.7 |
| 7210025700 |
TOOL-SETTING-LENS DISC |
4796.3 |
| 7210025800 |
TOOL-SETTING-END PLATES |
13307.6 |
| 7210025900 |
TOOL-SETTING FRINGE FILTER |
12690 |
| 7210026400 |
TOOL AXIAL ALIGNMENT |
4074.7 |
| 7210026800 |
TOOL OPTICAL ALIGNMENT JIG CARY 13 |
37207.1 |
| 7210026900 |
Tool RF Box Feet |
3095.5 |
| 7210027000 |
TOOL BALL DRIVER 5MM |
519.7 |
| 7210027100 |
TOOL OFFSET DRIVER P2D 1,2 OFFSET DRIVE |
672.6 |
| 7210027200 |
TOOL RINGOPEN 7MM SPANNER |
345.9 |
| 7210027300 |
DUMMY GRATING SP50-220 |
8416.5 |
| 7210027400 |
TOOL OPTICS ALIGNMENT TARGET |
6977.1 |
| 7210027500 |
TOOL C SPANNER - DIA 34 |
459.6 |
| 7210027800 |
TOOL JIG BACKLIGHT |
4028.4 |
| 7210028000 |
JIG SAMPLE COMPARTMENT CARY 50 |
7717.6 |
| 7210028100 |
TOOL HEX 2.5 AF L-SHAPED BALLDRIVER LONG |
217.6 |
| 7210028300 |
BACKLIGHTING JIG (LASER) |
15776.2 |
| 7210028800 |
PILOT MIRROR JIG (PRE OPTICS TARGET) |
12677.1 |
| 7210028900 |
TOOL- ALIGNMENT SLIT- POLY |
2524.6 |
| 7210030700 |
TOOL TARGET PRE-OPTICS |
1265.2 |
| 7210030900 |
C SPANNER, PRE-OPT. WINDOW 55MM DIA FLA |
526 |
| 7210031100 |
TOOL MIRROR ADJUST VISTA POLYCHROMATOR |
1938.7 |
| 7210032600 |
Tool Setting Shim |
132.4 |
| 7210032800 |
Sample compt alignment target jigmirror |
21964.4 |
| 7210033200 |
Tool Disk Target |
2925.6 |
| 7210033300 |
Tool Alignment Target |
3356.1 |
| 7210033600 |
Tool cone screw removal |
1726.4 |
| 7210034300 |
Tool - leadscrew alignment 6x6 and 8x6 |
5083.9 |
| 7210034500 |
Tool, UV-VIS Patch Align Target |
25052.5 |
| 7210034600 |
Tool, NIR Patch Align Target |
25052.5 |
| 7210034700 |
Tool, UV-VIS Patch Align Target 500i |
16109.8 |
