Thermo Dionex 088487 AG22 阴离子保护柱-快速柱 4μ,4X30MM
货号 |
描述 |
价格 |
| 088487 | AG22 阴离子保护柱-快速柱 4μ,4X30MM | 7701 |
| 适用于（应用） | Anion Exchange Anion Exchange |
|---|---|
| 包装材料 | Polymeric |
| 粒径 | 10 µm |
| 固定相 | IonPac AS22 Fast-4 µm |
| 类型 | Standard Bore Guard |
| 认证/合规 | U.S. EPA Method 300.0 (A) |
| 色谱柱容量 | 4 µeq |
| 色谱柱化学特性 | Carbonate/Bicarbonate |
| 流速 | 2.0 mL/min. |
| 较大压力 | 5000 psi (345 bar) |
| pH | 0 to 14 |
| 长度（公制） | 30 mm |
| 直径（公制） | 4 mm |
| 交联 | 55% DVB |
| 柱结构 | PEEK |
| 疏水性 | Ultralow |
| 流动相兼容性 | pH 0 to 14, 0 to 100% HPLC Solvents |
| 阴离子交换容量 | 4.0 µeq |
| 离子交换基 | Alkanol Quaternary Ammonium Ion |
| 溶剂 | 0 to 100% of HPLC Solvents |
| 适用于（设备） | IonPac AS22-Fast-4 µm Analytical Column |
| Unit Size | Each 1 |
Fast separation of common inorganic anions with excellent resolution
- Obtain the highest peak efficiency, through the use of smaller resin particles, of common inorganic anions in diverse sample matrices
- Attain fast isocratic separation of the common inorganic anions in less than 5 min
- Perform compliance monitoring of common anions in drinking water as specified in U.S. EPA Method 300.0 (A)
- Achieve excellent separation of inorganic anions and low-molecular weight acids in diverse sample matrices
- Obtain high peak efficiency and increased peak resolution for more consistent integration and more reliable results
- Transfer application easily--this 4µm column has the the same selectivity as the Dionex IonPac AS22-Fast column
- Achieve excellent resolution of the carbonate peak away from the common inorganic anions
- Reduce run time without loss of resolution compared to the Dionex IonPac AS22-Fast column
- Faster alternative, using carbonate/bicarbonate eluents, for Dionex IonPac AS4A-SC, AS12A, AS14, AS14A and AS22 inorganic anion applications
- Compatible with organic solvents to enhance analyte solubility, modify column selectivity, or allow effective column cleanup
Use with a high-pressure IC system
Higher resolution is achieved through the use of smaller resin particles, which can produce a column backpressure over 3000 psi. When operating the Dionex IonPac AS22-Fast-4µm column, a high-pressure IC system, such as the Thermo Scientific™ Dionex™ ICS-5000+ HPIC or the Dionex ICS-4000 HPIC is required.
Reduce operating costs with lower eluent requirements
The Dionex IonPac AS22-Fast-4µm capillary column provides the same performance as the standard bore and microbore Dionex IonPac AS22-Fast-4µm columns because it is packed with the same material. Operating costs are reduced because the capillary system operates at only 1% of the eluent flow rate of the standard bore system, requiring less eluent and producing less waste.
Use the cormat that fits your lab
- 4x150mm, 2x150mm analytical columns
- 4x30mm, 2x30mm guard columns
- 0.4x150mm capillary column, 0.4x35mm capillary guard column
- Shorter 150mm columns facilitate faster runs while the smaller particle size maintains a higher resolution separation
- Capillary columns provide reduced operating and waste disposal costs through eluent conservation
Note: For simple, accurate eluent preparation, use the Dionex IonPac AS22 Eluent Concentrate or the Dionex Eluent Generator (Dionex EGC 500 K2CO3 cartridge with Dionex EPM 500 pH modifier).
